Suzuki Front Sprocket

$37.00

Suzuki logo
Clear
SKU: RM-1_ Category:

Description

The Dirt Tricks Suzuki Front Sprocket is built from an ultra-hard tool steel. Most front sprockets sold today are “case hardened”, meaning that only a thin outer layer of steel is hardened. Below that layer is soft steel. Our front sprockets are heat treated, giving them the ultimate toughness and wear resistance. How can we have such a hard material without it being brittle? Shock resistant tool steel is the answer. This is the same steel used to punch holes through 1″ thick plates of steel, on high speed punch presses.

Features:

  • MADE IN THE USA!
  • One year wear guarantee:
    if you wear it out, we will replace it!
  • Made from high grade shock resistant tool steel
  • Machined to the tightest industry standards
  • Special “through” hardening process for
    ultimate toughness and longevity
  • 13 tooth front sprocket Weighs 3.5oz

Note: Attention should be taken to monitor the wear to your chain slider when using a 12 tooth sprocket due to its smaller diameter.

Suzuki RM1 Front Sprocket Fitment:

  • Suzuki: ’07-’12 RMZ 250
    ’88-’08 RM 125

Suzuki RM2 Front Sprocket Fitment:

  • Suzuki: ’86-’08 RM 250
    ’89-’01 RMX 250
    ’90-’99 DR 350
    ’00-’04 DR/DRZ 400

Suzuki RM3 Front Sprocket Fitment:

  • Suzuki: ’04-’06 RMZ 250
  • Kawasaki: ’04-’05 KXF 250

Suzuki RM3B Front Sprocket Fitment:

  • Suzuki: ’13-’15 RMZ 250

Suzuki RM4B Front Sprocket Fitment:

  • Suzuki: ’06-Current RMZ 450

GEAR RATIO CHART

Additional information

Weight 0.34375 lbs
Dimensions 6 x 4 x 0.5 in