2008 KTM 530 XCR-W

KTM Stabilizer Under Bar (SUB) Scotts damper mount on a 2008 billet KTM triple clamp. The Damper is mounted independent of the bars and therefore always stays in the correct position. Our system allows the use of any of the four KTM bar positions. This system raises the bars 23mm from the OEM position, making riding on the pegs much more comfortable. Available for both KTM triple clamps - forged and billet. Accommodates the 18mm or 20mm offset on the billet clamp.  Pt. # KT-BU

2008 KTM 300 with SUB mount.

Over Bar Kits

KTM 2008 Top Bar Mount for Scotts Damper (Billet Triple Clamps)

The Dirt Tricks frame anchor is constructed in three separate components. The steer tube clamp is a 180 degree two piece unit which clamps rigidly to the steer tube just under the dust seal. No drilling or welding required!  (Disassembly of the triple clamp may be required only if stock dust seal rubs on the clamp. This is hit or miss depending on how thick KTM machined the seal on that particular day.) The vertical post bolts to the lower clamp and is horseshoe shaped to allow cables to pass through if necessary. A machined one piece aluminum pin engages the Scott's damper link arm. Pt. # KT-BO

Damper Mount Kits